Ronabond® EP Primer

12 months from the date of production

Stored properly in undamaged and unopened original sealed packaging in the temperature range +5 ^oC to +35 ^oC. Protect from direct sunlight and frost.

3 : 1 (Part A : Part B)

5 ^oC to 35 ^oC

Approx. 30 minutes

1 hour (Touch dry), 7 days (Full cure)

7–8 m²/litre

Ronabond® EP Primer Parts A & B components should be mixed in the ratio of 3:1 by volume using a slow speed mixer or hand taking care to avoid introducing too much air into the mix during mixing. Mixing should continue for about 2 minutes or until a homogeneous mix is achieved.

Apply by brush or squeegee & roller. Aim to apply approx. 7–8m²/litre of mixed product. Depending on the condition of the substrate this should result in an even application. Increase the coverage rate or apply a second coat if necessary.

Equipment should be cleaned with a damp cloth and then with a minimum of Xylene, Acetone or Methylated spirits.