Sikafloor® MultiDur ES-26
Sikafloor® MultiDur ES-26 is a smooth coloured rigid system for flooring applications
- Good chemical and mechanical resistance
- Good wear and abrassion resistance
- Easy application
- Liquid proof
- Gloss finish
- Easy cleanability
- Colour options
System Structure
1
Primer
2
Wearing coat
Usage
Self-smoothing system for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages, loading ramps etc.Advantages
- Good chemical and mechanical resistance
- Good wear and abrassion resistance
- Easy application
- Liquid proof
- Gloss finish
- Easy cleanability
- Colour options
Packaging
Please refer to the individual Product Data Sheets
Appearance
Smooth gloss finish
System Details
APPROVALS / STANDARDS
- Particle emission certificate Sikafloor-263 SL CSM Statement of Qualification – ISO 14644-1, class 4– Report No. SI 0904-480 and GMP class A, Report No. SI 1008-533.
- Outgassing emission certificate Sikafloor-263 SL CSM Statement of Qualification – ISO 14644-8, class 6,5 - Report No. SI 0904-480.
- Good biological Resistance in accordance with ISO 846, CSM Report No. 1008-533
- Fire classification Bfl-S1 in accordance with EN 13501-1, Report-No. 2013-B-2119/01, MPA Dresden, Germany, June 2013
Shelf Life
Please refer to the individual Product Data Sheets
Storage Conditions
Please refer to the individual Product Data Sheets
System Structure
Sikafloor® MultiDur ES-26
1. Primer | Sikafloor®-156/-161/-160 |
2. Wearing Coat | Sikafloor®-264 |
Composition
Epoxy
Nominal Thickness
~ 1.5–3.0 mm
Shore D Hardness
~ 76 (7 days / +23 °C) | (DIN 53 505) |
Abrasion Resistance
~ 35 mg (CS 10/1000/1000) (7 days / +23 °C) | (DIN 53 109 Taber Abraser Test) |
Resistance to Impact
~ 10 Nm (14 days / +23 °C / 50 %) | (ISO 6272) |
Compressive Strength
~ 50 N/mm2 (28 days / +23 °C, Resin filled 1:0.9 with F34) | (EN 196-1) |
Tensile Strength
~ 16 N/mm2 (28 days / +23 °C, Resin filled 1:0.9 with F34) | (EN 196-1) |
Tensile Adhesion Strength
> 1.5 N/mm² (failure in concrete) | (ISO 4624) |
Reaction to Fire
Bfl-S1 | (DIN EN 13501-1) |
Chemical Resistance
Resistant to many chemicals. Contact Sika technical service for specific advice.
Application
Product Temperature
Please refer to the individual Product Data Sheet
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
80 % r.h. max.
Dew Point
Beware of condensation! The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
When performing application work with Sikafloor® MultiDur ES-26, the substrate moisture content must not exceed 4 % pbw measured by Tramex. Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).
Waiting Time / Overcoating
Before applying Sikafloor®-264 on Sikafloor®-156/-161/-160 allow:
Substrate Temperature | Minimum | Maximum |
+10 °C | 24 hours | 3 days |
+20 °C | 12 hours | 2 days |
+30 °C | 8 hours | 1 day |
Applied Product Ready for Use
Temperature | Foot Traffic | Light Traffic | Full Cure |
+10 °C | ~ 72 hours | ~ 6 days | ~ 10 days |
+20 °C | ~ 24 hours | ~ 4 days | ~ 7 days |
+30 °C | ~ 18 hours | ~ 2 days | ~ 5 days |
Consumption
Sikafloor® MultiDur ES-26 system ( ~ 1.5–3.0 mm)
Coating System | Product | Consumption |
Primer | 1 × Sikafloor®-156/-161/-160 | ~ 0.3–0.5 kg/m² |
Wearing coat | 1 pbw Sikafloor®-264 filled with up to 1 pbw quartz sand (0.1–0.3 mm) depending on the temperature. | Maximum 1.9 kg/m² /mm |
CLEANING
Refer to the Method Statement Sikafloor®‐ Cleaning Regime