Product Data Sheet Show all documents

Monoprufe® SX 700

Hot Spray Applied High performance Polyurea Waterproofing Membrane

Monoprufe® SX 700 is a very high performance elastic fast curing waterproofing system with exceptional strength and durability. Based on 2 component pure polyurea resins it is intended for application using specialist heated spray equipment with mixing occurring at the nozzle. Monoprufe® SX 700 sets in seconds to immediately form a weather and UV resistant membrane. It is elastic, has exceptional tear, tensile and bond strength and will adhere strongly to most sound and dry substrates.

  • Effectively instantaneous performance
  • Excellent toughness & durability
  • Excellent waterproofing
  • Excellent bond strength
  • Highly UV resistant and elastic
  • Suitable for constant immersion
  • Highly resistant to most common household, gardening and industrial chemicals
  • Solvent free & low VOC
 
Product Data Sheet Show all documents

Usage

  • Ideal for exposed long term zero maintenance areas such as roof top installations
  • Internal areas where waterproofing, chemical resistance and easy cleaning are important
  • Trafficable
  • Internal and external use
  • Mining
  • Tank linings
  • Ship hold linings
  • Ship freezer linings
  • Truck beds
  • Secondary containment holds
  • Swimming pool linings
  • Roof decks
  • Balconies
 

Advantages

  • Effectively instantaneous performance
  • Excellent toughness & durability
  • Excellent waterproofing
  • Excellent bond strength
  • Highly UV resistant and elastic
  • Suitable for constant immersion
  • Highly resistant to most common household, gardening and industrial chemicals
  • Solvent free & low VOC
 

Packaging

42.5 kg per pack (22.5 kg Part A & 20 kg Part B)

425 kg per pack (225 kg Part A & 200 kg Part B)

Product Details

Product Information

Shelf life

12 months from the date of production

Storage conditions

Stored properly in undamaged and unopened original sealed packaging in the dry conditions. Protect from direct sunlight and frost.
Technical Information

Shore A Hardness

76

(ASTM D2240-05)

Abrasion Resistance

< 0.1 g

(ASTM D4060-07)

(H-18, 1000 g, 1000 cycles)

Tensile Strength

Approx. 15 MPa

(ASTM D412-06a)

Tensile Adhesion Strength

2 MPa

(ASTM D4541)

Tear Strength

Approx. 60 N/mm

(ASTM D624-00)

Application

Application Information

Mixing Ratio

1 to 1 by volume

Layer Thickness

1.0 to 3.0 mm thick

Curing Time

Curing time will depend on the ambient conditions but the surface should be left undisturbed for 12 hours prior to full service of the waterproofing membrane.
Consumption

Consumption

Approximately 1 to 1.1 kg/m2/mm thick. The consumption rate will be varied with surface porosity and texture.
Application steps

SUBSTRATE PREPARATION

Monoprufe® SX 700 must be applied onto sound concrete, screed or similarly supportive ceramic substrate. The substrate should be dry, clean, free of oil, grease and other removable contaminants.

Prime the surfaces with Monoprufe® Primer X and broadcasting sand onto tacky primer to improve the bonding. Allow the primer to dry for 4–6 hours.

CLEANING OF EQUIPMENT

Tools and equipment should be washed with solvent after use. Painted surfaces, metal and glass should be protected during application.

Documents