Product Data Sheet Show all documents

Monoset® RXV

Fast Set Waterproof High Build Mortar

Monoset® RXV is a prepacked polymer modified waterproof mortar formulated for rendering where both waterproofing and speed of strength gain are of paramount importance. Monoset® RXV is manufactured from a blend of rapid hardening cement, lightweight fillers and waterproofing admixtures. Monoset® RXV will achieve a monolithic bond to most cementitious substrates and will be hardened within two hours.

  • High early strength gain
  • Reduces down time and disruption
  • Permits same day decoration
  • Water based low odour formulation
  • Easy to apply on vertical surfaces
  • Excellent waterproofing characteristics
Product Data Sheet Show all documents

Usage

  • Kitchens
  • Toilets
  • Water tanks
  • Swimming pools

Advantages

  • High early strength gain
  • Reduces down time and disruption
  • Permits same day decoration
  • Water based low odour formulation
  • Easy to apply on vertical surfaces
  • Excellent waterproofing characteristics

Packaging

34.8 kg per pack

Colour

Concrete grey

Product Details

Product Information

Shelf life

6 months from the date of production

Storage conditions

Stored properly in undamaged and unopened original sealed packaging in the temperature range +5 oC to +35 oC. Protect from direct sunlight and frost.

Density

Approx. 2100 kg/m3
Technical Information

Compressive Strength

Age at Test

Monoset® RXV

Typical Performance

Test Method
24 hours> 5 MPa

HKHA MTS Spec

Part D Clause 2.1.1

28 days> 20 MPa

HKHA MTS Spec

Part D Clause 2.1.1

Shrinkage

Age at Test

Monoset® RXV

Typical Performance

Test Method
1–28 days

No cracks between

1 & 28 days

Coutinho Ring Method

HKHA MTS Spec

Part D Clause 2.1.6

Tensile Adhesion Strength

Age at Test

Monoset® RXV

Typical Performance

Test Method
28 days> 1 MPa

HKHA MTS Spec

Part D Clause 2.1.14

Water Absorption

Age at Test

Monoset® RXV

Typical Performance

Test Method
28 days

< 0.015 ml/m2/s

at 120 minutes

BS 1881 Part 5

Application

Application Information

Ambient Air Temperature

> 5 oC

Initial Set Time

Approx. 30 minutes
Consumption

Yield

60 packs/m3
Application steps

MIXING

Mix both components of Monoset® RXV using a drill and paddle close to area of application.

APPLICATION

Trowel apply onto tacky primer. Build-up the thickness to minimum 15 mm. Finish with a wood float or stainless steel trowel.

CLEANING OF EQUIPMENT

Clean all tools and application equipment with clean water immediately after use.

 

Documents