Product Data Sheet Show all documents

Sika® Ready Mix Tile Adhesive

High Performance Acrylate Base Dispersion Adhesive

Sika® Ready Mix Tile Adhesive is a 1-part high performance acrylate base dispersion adhesive. It is ready-mix with consistent quality for thin or thick-bed applications.

  • Ready-mix with consistent quality
  • Good workability and easy to apply
  • Good adhesive bond strength
  • Good deformation ability
  • High viscosity & slip resistance
  • Water-resistance
Product Data Sheet Show all documents

Usage

Sika® Ready Mix Tile Adhesive is ideal for bonding of ceramic tiles, homogeneous tiles, porcelain tiles, glass tiles on concrete, wall renders, rigid wooden board, gypsum board, rigid tiled surface and floor screeds for interior applications. It offers excellent resistance to thermal movement deformation. These qualities are particularly beneficial for application on exposed areas.  

Advantages

  • Ready-mix with consistent quality
  • Good workability and easy to apply
  • Good adhesive bond strength
  • Good deformation ability
  • High viscosity & slip resistance
  • Water-resistance

Packaging

5 kg/pail & 18 kg/pail

Colour

Beige

Product Details

Product Information

Chemical Base

Acrylate base dispersion adhesive

Shelf Life

12 months from date of production

Storage Conditions

Stored properly in undamaged and unopened original sealed packaging in cool dry conditions. Protect from direct sunlight and frost.

Density

1600 kg/m3
Technical Information

Tensile Adhesion Strength

> 0.5 MPa

Application

Application Information

Pot Life

~ 30 min at 20 °C

 

Waiting Time / Overcoating

Leave a tile joint spacing around 2 mm. Do not apply adhesive and tiles over movement joints. Remove excess adhesive with a clean damp cloth or sponge before drying. Allow at least 24 hours curing before joint grouting works.
Consumption

Consumption

~ 1.65 kg/m2/mm
Application steps

APPLICATION

Stir well before use. Use a trowel or straight edge to spread Sika® Ready Mix Tile Adhesive onto the substrate. Then comb the adhesive evenly using a notched trowel. Place the tiles within be open time and press firmly to ensure full bedding contact by twisting action. For tiles with deep grooves, apply an extra layer of adhesive to the back for full bedding.

CLEANING OF TOOLS

Tools should be washed with clean water immediately after use and before the tile adhesive sets.

Documents