Product Data Sheet Show all documents
Ronabond® Premixed Render

Ronabond® Premixed Render

Hand or Spray Applied Polymer Enhanced High Build Render

Ronabond® Premixed Render is a polymer enhanced mortar designed for internal and external render applications. Ronabond® Premixed Render is pre-bagged ensuring correct mixing proportions which avoids possible mixing errors on site. Ronabond® Premixed Render is suitable for hand or spray application and can be applied to a variety of substrates.

  • Premixed for quality control
  • Sprayable
  • Excellent bonding characteristics
  • Improved workability
  • High build properties
  • Low VOC
Product Data Sheet Show all documents

Usage

  • Blockwork
  • Brickwork
  • Internal and external concrete substrates
  • Drywall
  • Fair faced concrete
  • Internal & external application
 

Advantages

  • Premixed for quality control
  • Sprayable
  • Excellent bonding characteristics
  • Improved workability
  • High build properties
  • Low VOC

Packaging

25 kg bag

Colour

Concrete grey

Product Details

Product Information

Shelf Life

9 months from the date of production.

Storage Conditions

Stored properly in undamaged and unopened original sealed packaging. Protect from direct sunlight and frost.
Technical Information

Compressive Strength

25 MPa @ 28 days

Tensile Strength

2.6 MPa @ 28 days

Shrinkage

Age at Test

Ronabond® Premixed Render

Typical

Performance

Test Method
1 & 28 days

No crack between

1 & 28 days

Coutinho Ring (TM6)

Tensile Adhesion Strength

1.1 MPa @ 28 days

Water Absorption

Initial water absorption ---  test at 120min, ISAT ~ 0.02ml/(m².s)

Application

Application steps

MIXING

Mix using a forced action mixer or using a slow speed drill and paddle. Place the whole bag of powder into the mixing vessel and add approximately 4 litres of clean water. Mix for 3–5 minutes to achieve a homogeneous workable mortar.

APPLICATION

Ronabond® Premixed Render can be applied up to 50 mm thickness in a single application.

   

Pumping / Spraying:

To pump or spray Ronabond® Premixed Render, a continuous mixing and pumping machine should be utilized for both mixing and spraying. Ronabond® Premixed Render is continuously fed into the mixing machine hopper and mixed with clean water

 

to provide a homogeneous workable mortar.

CLEANING OF TOOLS

Clean all tools and application equipment with clean water immediately after use.

Documents