Product Data Sheet Show all documents
Unicell® Primer

Unicell® Primer

Priming, Bonding and Passifying Agent for Concrete and Steel Reinforcement

Unicell® Primer is a liquid bonding and priming aid which requires mixing with OPC to form a brushable slurry with exceptional performance characteristics. Onto steel reinforcement, Unicell® Primer forms a passifying layer, a tough flexible barrier against damaging ions and oxidation plus a strong bond to subsequent construction. Onto concrete substrates, Unicell® Primer provides enhanced bonding and a barrier to water and ion ingress. Designed specifically for use with Sika’s Unicell® range of mortars and renders, Unicell® Primer is also compatible with most cementitious mortars, renders, concretes and screeds.  

  • Water based
  • Easy to use
  • Excellent bond and waterproofing performance
  • Low VOC
  • Economic
Product Data Sheet Show all documents

Usage

  • Steel protection in reinforced concrete
  • Concrete repair
  • Thin / Thick section bonding for mortars
  • Screeds and renders

Advantages

  • Water based
  • Easy to use
  • Excellent bond and waterproofing performance
  • Low VOC
  • Economic

Packaging

5 litres drum

30 litres drum

Colour

Milky white

Blue after mix with OPC

Product Details

Product Information

Shelf life

9 months from the date of production

Storage conditions

Stored properly in undamaged and unopened original sealed packaging in the dry conidions at temperature range from +5 oC to +35 oC. Protect from direct sunlight and frost.
Technical Information

Tensile Adhesion Strength

Test Method

ResultHKHA Requirements

TM4

For Unicell® 25

2.2 MPa at 7 days

3.0 MPa at 28 days

Minimum 1.5 MPa at 7 days (Class 25)

TM4
For Unicell® 40

2.7 MPa at 7 days

3.5 MPa at 28 days

Minimum 2.0 MPa at 7 days (Class 40)

TM4

For Unicell® WF

2.5 MPa at 7 days

3.0 MPa at 28 days

N/A
 

Application

Application Information

Ambient Air Temperature

> 5 oC
Application steps

APPLICATION

Concrete surfaces to be primed must first be wetted with clean water. Remove any excess water before priming. To mix pour the Unicell® Primer liquid into a suitable mixing vessel and slowly add the cement mixing with a slow speed drill and paddle (typically 500 rpm). The addition of cement should be at the ratio of either 1 part Unicell® Primer to 1.5 parts OPC by volume or 1 part Unicell® Primer to 2 parts OPC by weight. Once mixed prime any steel reinforcement and allow the primer to become tacky. Then brush apply a second coat of primer to the reinforcement and a first of the concrete. Whilst the primer is wet/tacky it should be over coated with the Unicell® 25, Unicell® 40 or Unicell® WF. If the primer should dry it must be cross hatch scratched and reapplied.

 

Coverage

4–8 m2/litre

CLEANING OF EQUIPMENT

Clean all tools and application equipment with clean water immediately after use.

Documents