Product Data Sheet Show all documents

Ronabond® EPA 711

Epoxy Tile Bonding Adhesive

Ronabond® EPA 711 is a water cleanable epoxy tile adhesive for tiles, all types of stone and water sensitive marbles. Ronabond® EPA 711 is supplied in a pre-packed kit consisting of epoxy resin and hardener. Ronabond® EPA 711 can be applied to a variety of substrates including plywood, glass, concrete and existing tiles.

  • High compressive strengths
  • Water cleanable
  • Rated for heavy commercial use
  • Meets or exceeds ANSI A118.3 requirements
  • Can be applied to a variety of substrates
  • Chemical resistant
  • Low odour
  • Non-flammable
Product Data Sheet Show all documents

Usage

  • Residential and commercial buildings
  • Floors
  • Bathrooms
  • Bottling plants
  • Laboratories
  • Pharmaceutical factories
  • Distilleries
  • Installing moisture sensitive marble or stone
 

Advantages

  • High compressive strengths
  • Water cleanable
  • Rated for heavy commercial use
  • Meets or exceeds ANSI A118.3 requirements
  • Can be applied to a variety of substrates
  • Chemical resistant
  • Low odour
  • Non-flammable

Packaging

6.8 kg per pack (3.4 kg Part "A" and 3.4 kg Part "B")

Product Details

Product Information

Product Declaration

Tensile Strength> 6.9 MPa
Water Cleanability> 80 mins at 23 oC
Initial Setting Time> 2 hours at 23 oC

Chemical Base

Epoxy

Shelf Life

12 months from the date of production

Storage Conditions

Stored properly in undamaged and unopened original sealed packaging in dry conditions. Protect from direct sunlight and frost.
Technical Information

Compressive Strength

> 35 MPa

Shear Adhesion

> 6.9 MPa

Water Absorption

Nil

Application

Application Information

Pot Life

90 minutes at 23 oC

Curing Time

16–24 hours at 23 oC
Consumption

Consumption

1.7 kg/m2/mm
Application steps

MIXING

Thoroughly mix part "A" before adding part "B" hardener component. Mix using a low speed mixer or preferably by hand for at least 5 minutes.

APPLICATION

Spread epoxy mixture over the face of the substrate using the flat edge of a trowel. Comb the adhesive with the recommended size notched trowel for the type of tile being installed. Mix and apply no more than can be used in 60 minutes.

CLEANING OF TOOLS

Clean all tools and application equipment with clean water immediately after use.

 

Documents