Product Data Sheet Show all documents
SikaCeram®-113 HK

SikaCeram®-113 HK

HIGH PERFORMANCE CEMENTITIOUS TILE ADHESIVE

SikaCeram®-113 HK is a one-component polymer modified high performance cementitious thin bed tile adhesive used for fixing of tiles. Suitable for bonding different types of tiles in both internal and external conditions.

Conforms to EN 12004 C1T Tile Adhesive
  • High bond strengths
  • Easy to use, just add water
  • Excellent workability
  • Water resistance
  • Can be applied directly on cement screeds, concrete or lime mortars
  • Suitable for indoor and outdoor application
  • Non Toxic and low VOC
Product Data Sheet Show all documents

Usage

SikaCeram®-113 HK is suitable for fixing:
▪ Wall and floor tiles
▪ Insulation and acoustic tiles
▪ Marble and terrazzo tiles
▪ Mosaics and ceramic tiles  

Advantages

Conforms to EN 12004 C1T Tile Adhesive
  • High bond strengths
  • Easy to use, just add water
  • Excellent workability
  • Water resistance
  • Can be applied directly on cement screeds, concrete or lime mortars
  • Suitable for indoor and outdoor application
  • Non Toxic and low VOC

Packaging

25 kg bag

Colour

Grey powder

Product Details

Product Information

Chemical Base

Cementitious mortar modified with specialized polymers

Shelf Life

12 months

Storage Conditions

Stored properly in undamaged and unopened original sealed packaging in cool dry conditions. Protect from direct sunlight and frost.
Technical Information

Tensile Adhesion Strength

(Comply to EN 12004 requirement for C1T Classification)

Standard Conditions≥ 0.5 N/mm2
Heat Ageing≥ 0.5 N/mm2
Water Immersion≥ 0.5 N/mm2
Freeze Thaw Cycle≥ 0.5 N/mm2
Open Time≥ 0.5 N/mm2 at 20 minutes
Slip≤ 0.5 mm
 

Application

Application Information

Mixing Ratio

Add approx. 5.5–6 litres of clean water per 25 kg bag of powder

Substrate Temperature

+5 oC min. / +35 oC max. (substrate)

Pot Life

Approx. 2 hours
Consumption

Consumption

Approx. 1.1 kg powder/m²/mm (Depend on surface profile & size of notched trowel).
Application steps

MIXING

Add clean, cold water to a clean, suitable mixing container. Slowly add the SikaCeram®-113 HK powder and mix for at least 3 minutes until a homogeneous mix, free of lumps is achieved. Allow the mixture to stand for 5 minutes, and re-mix again before use by means of a slow speed drill.

  

Do not add extra water or other ingredients after mixing!

APPLICATION

Apply SikaCeram®-113 HK directly to the concrete substrate, using a notched trowel and spread the mortar evenly over the area to be tiled. Press tiles firmly into SikaCeram®-113 HK with a twisting action to ensure optimum adhesion. The application thickness of SikaCeram®-113 HK should be 3-6 mm.

Cover only an area that can be tiled within the open time. When the surface of the spreaded tile adhesive is dry, remove and replace with fresh materials. Remove excessive tile adhesive before the adhesive has set. Wait for 24 hours to carry the joint grouting works.

CLEANING OF TOOLS

Clean all tools and application equipment with clean water immediately after use. Hardened / cured material can only be removed mechanically.

 

Documents