Product Data Sheet Show all documents
Unicell® 60

Unicell® 60

Prebagged High Build, High Strength, Waterproof Class 60 Repair Mortar

Unicell® 60 is a prepacked vinyl acetate copolymer modified mortar requiring only the addition of clean water to produce a mortar suitable for structural concrete repair. It can be applied in thick section and is suitable for structural application. Layers 20–30 mm can be achieved depending upon substrate profile and technique. Greater thickness may be possible when applying material into pockets. Successive layers can be built up to achieve the required thickness once the previous layer has become firm.  

  • Prebagged giving greater confidence
  • Single pack requiring only the addition of water
  • Easy to apply on overhead surfaces
  • Easy to achieve smooth surface finish
  • Suitable for structural repairs
Product Data Sheet Show all documents

Usage

  • Thick section concrete repairs to vertical and overhead surfaces
  • Can be used internally and externally
  • Structural and cosmetic repairs to buildings and bridges
  • Reinstate damaged concrete and protect reinforcement

Advantages

  • Prebagged giving greater confidence
  • Single pack requiring only the addition of water
  • Easy to apply on overhead surfaces
  • Easy to achieve smooth surface finish
  • Suitable for structural repairs

Packaging

25 kg bag

Colour

Concrete grey

Product Details

Product Information

Shelf Life

6 months

Storage Conditions

Stored properly in undamaged and unopened original sealed packaging in dry conditions. Protect from direct sunlight, moisture and frost.
Technical Information

Compressive Strength

> 60 MPa at 28 days

Tensile Strength

> 2 MPa at 28 days

Tensile Adhesion Strength

> 2 MPa at 28 days

Shrinkage

Age at TestUnicell® 60
Typical Performance		Test Method
1–28 daysNo cracking in 1–28 daysCoutinho ring
 

Application

Consumption

Consumption

Approx. 58 bags/m3
Application steps

MIXING

Mix the whole bag of Unicell® 60 with 4 – 4.5 litres clean water to even consistency with the aid of a mechanical mixer.

APPLICATION

  • Apply the well mixed Unicell® 60 mortar to the prepared and primed substrate before the primer coat dries
  • Maximum thickness is up to 30 mm per layer
  • Intermediate layers should be scratched or keyed and primed before the next layer is applied
  • Finished the repair to the desired profile using steel trowel or wood float
  • Cure the finished surface with Monocure 50
 

CLEANING OF TOOLS

Clean all tools and application equipment with clean water immediately after use.

Documents