Product Data Sheet Show all documents
Monoset® RX

Monoset® RX

Ultra Rapid Hardening Mortars for Floor Repairs and Bedding

Monoset® RX is a prepacked polymer modified waterproof mortar designed for repairing existing floors or laying new floors where waterproofing and speed of strength gain is of paramount importance. Monoset® RX is manufactured from a blend of non-shrink cements, rapid hardening fillers and waterproofing admixtures. Monoset® RX will achieve a monolithic bond to most cementitious substrates and will accept foot traffic in about one hour of placement.

  • High early strength gain
  • Reduces down time and disruption
  • Water based low odour formulation
  • Easy to apply
  • Excellent waterproofing characteristics
  • HKHA approved material
  • Low VOC
Product Data Sheet Show all documents

Usage

  • Kitchens
  • Balconies
  • Watertanks
  • Roofs
  • Concrete repairs
  • Flooring works

Advantages

  • High early strength gain
  • Reduces down time and disruption
  • Water based low odour formulation
  • Easy to apply
  • Excellent waterproofing characteristics
  • HKHA approved material
  • Low VOC

Packaging

33.6 kg per pack (30 kg bag of powder & 3.6 kg drum of liquid)

Colour

Concrete grey

Product Details

Product Information

Shelf Life

6 months from the date of production

Storage Conditions

Stored properly in undamaged and unopened original sealed packaging in the dry conditions at temperature range +5 oC to +35 oC. Protect form direct sunlight, moisture and frost.

Density

2200 kg/m3
Technical Information

Compressive Strength

Age at Test

Monoset® RX

Typical Performance

Test Method
2 hours> 5 MPa

HKHA MTS Spec

Part D Clause 2.1.1

24 hours> 15 MPa

HKHA MTS Spec

Part D Clause 2.1.1

28 days> 40 MPa

HKHA MTS Spec

Part D Clause 2.1.1

Tensile Adhesion Strength

Age at Test

Monoset® RX

Typical Performance

Test Method
28 days> 1 MPa

HKHA MTS Spec

Part D Clause 2.1.14

Shrinkage

Age at Test

Monoset® RX

Typical Performance

Test Method
1–28 days

No cracks between

1 & 28 days

Coutinho Ring Method HKHA MTS Spec

Part D Clause 2.1.6

Water Absorption

Age at Test

Monoset® RX

Typical Performance

Test Method
28 days

< 0.015 ml/m2/s

at 120 minutes

BS 1881 Part 5

Application

Application Information

Ambient Air Temperature

> 5 oC

Initial Set Time

Approx. 30 minutes
Consumption

Consumption

Approx. 60 packs/m3
Application steps

MIXING

Mix components using drill and paddle or mechanical pan mixer close to area of use.

APPLICATION

Trowel apply onto wet or tacky primer. Finish with float or trowel. When bedding, the underside of the component must also be primed.

CLEANING OF TOOLS

Clean all tools and application equipment with clean water immediately after use.

Documents