Sikafloor® MultiDur EB-14
Sikafloor® MultiDur EB-14 is a slip resistant, coloured, rigid flooring system based on epoxy resins conforming to OS8 German standards.
- Conforming the OS 8 German standards
- Good chemical and mechanical resistance
- Easy application
- Liquid proof
- Gloss finish
- Easy cleanability
System Structure
Usage
- For concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps.
- For multi-storey and underground car parks and for wet process areas, e.g. beverage and food industry
Advantages
- Conforming the OS 8 German standards
- Good chemical and mechanical resistance
- Easy application
- Liquid proof
- Gloss finish
- Easy cleanability
Packaging
Please refer to the individual Product Data Sheet
Appearance
Slip resistant, gloss finish
System Details
APPROVALS / STANDARDS
- Slip resistance certificate according to DIN 51130, class R11 V4, Report No.020108-13-16, Roxeler Institute, October 2013, Germany
- Slip resistance certificate according to DIN 51130, class R12 V6, Report No.020108-13-18, Roxeler Institute, October 2013, Germany
- Certified as Surface Protection System OS 8 according to DIN EN 1504-2 and DIN V 18026.
Shelf Life
Please refer to the individual Product Data Sheet
Storage Conditions
Please refer to the individual Product Data Sheet
System Structure
Sikafloor® MultiDur EB-14 system (~ 2–3 mm)
| 1. Scratch coat & broadcast | Sikafloor®-156/-161/-160 & broadcast with quartz sand 0.4–0.7 mm |
| 2. Wearing coat | Sikafloor®-264 |
Composition
Epoxy
Nominal Thickness
~ 2.0–3.0 mm
Chemical Resistance
Please refer to the chemical resistance chart of Sikafloor®- 264
Thermal Resistance
| Exposure* | Dry heat |
| Permanent | +50 °C |
| Short-term max. 7 d | +80 °C |
| Short-term max. 12 h | +100 °C |
Short-term moist/wet heat* up to +80 °C where exposure is only occasional (i.e. during steam cleaning etc.) *No simultaneous chemical and mechanical exposure.
Skid / Slip Resistance
R11 V4 | (DIN 51130) |
| R12 V6 | (DIN 51130) |
Application
Product Temperature
Please refer to the individual Product Data Sheet
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
80 % r.h. max.
Dew Point
Beware of condensation! The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
When performing application work with Sikafloor® MultiDur EB-14, the substrate moisture content must not exceed 4 % pbw measured by Tramex. Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).
Waiting Time / Overcoating
Before applying Sikafloor®-264 on Sikafloor®-156/-161/-160 allow:
| Substrate temperature | Minimum | Maximum |
| +10 °C | 24 hours | 3 days |
| +20 °C | 12 hours | 2 days |
| +30 °C | 8 hours | 1 day |
Before applying Sikafloor®-264 on Sikafloor®-264 allow:
| Title 1Substrate temperature | Minimum | Maximum |
| +10 °C | 30 hours | 48 hours |
| +20 °C | 24 hours | 24 hours |
| +30 °C | 16 hours | 30 hours |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | ~ 72 hours | ~ 6 days | ~ 10 days |
| +20 °C | ~ 24 hours | ~ 4 days | ~ 7 days |
| +30 °C | ~ 18 hours | ~ 2 days | ~ 5 days |
Consumption
Sikafloor® MultiDur EB-14 system (~ 2–3 mm)
| Coating System | Product | Consumption |
| Scratch Coat | 1 × Sikafloor®-156 /-160 filled at 1:1 with quartz sand 0.1–0.4mm or Sikafloor®-161 filled at 1:0.5 with quartz sand 0.1–0.4mm | ~ 1.3 kg/m² |
| Broadcast in excess | quartz sand 0.4–0.7 mm | ~ 4–6 kg/m² |
| Top coat | 2 × Sikafloor®-264 | ~ 0.6–0.8 kg/m² |
CLEANING
Please refer to the Method Statement Sikafloor®‐ Cleaning Regime