Product Data Sheet Show all documents

Monoprufe® WM

Normal Set Waterproof Mortar

Monoprufe® WM is a prepacked polymer modified waterproof mortar formulated for waterproof flooring and rendering application. Monoprufe® WM is manufactured from a blend of cement, graded fillers and waterproofing admixtures. Monoprufe® WM will achieve a monolithic bond to most cementitious substrates and will be hardened within 24 hours.

  • High bond strength
  • Water based low odour formulation
  • Easy to apply on vertical surfaces
  • Excellent waterproofing characteristics
Talk to Our Experts
Product Data Sheet Show all documents

Usage

  • Kitchens
  • Toilets
  • Water tanks
  • Swimming pools
 

Advantages

  • High bond strength
  • Water based low odour formulation
  • Easy to apply on vertical surfaces
  • Excellent waterproofing characteristics

Packaging

34 kg per pack (Powder (30kg) and Gauging Liquid (4kg))

Product Details

Product Information

Shelf Life

9 months from the date of production

Storage Conditions

Stored properly in undamaged and unopened original sealed packaging in the temperature range +5 oC to +35 oC. Protect from direct sunlight and frost.
Technical Information

Compressive Strength

> 20 MPa at 28 days

Tensile Adhesion Strength

> 1 MPa at 28 days

Shrinkage

Age at Test

Monoprufe® WM

Typical Performance

Test Method
28 daysNo crackingCoutinho Ring

Water Absorption

< 0.015 ml/m2/s at 120 minutes

 

Application

Application Information

Ambient Air Temperature

> 5 oC
Consumption

Yield

60 packs/m3
Application steps

MIXING

Mix both components of Monoprufe® WM using a drill and paddle close to area of application.

APPLICATION

Trowel apply onto tacky primer. Build-up the thickness to minimum 10 mm. Finish with a wood float or stainless steel trowel.

CLEANING OF TOOLS

Clean all tools and application equipment with clean water immediately after use.

 

Documents