Product Data Sheet Show all documents
Monoprufe® WS

Monoprufe® WS

Flexible Cementitious Waterproofing Slurry

Monoprufe® WS is a cement-based polymer modified waterproofing system, which is applied to concrete and mortar substrates to prevent the ingress of water. Supplied as a two-component material, Monoprufe® WS is a blend of polymers, cements, graded fillers and chemical binders. The two components are simply mixed at site to form a highly workable coating, which is either sprayed, roller or paint applied to the prepared substrate.

  • Suitable for horizontal and vertical application
  • Easy to mix and apply
  • Waterproofing static cracks and capillaries
  • Compatible with cement based substrates and render
  • Slightly flexible
  • Good adhesion
  • Non toxic
  • Impermeable
  • Low VOC
  • Can contribute to LEED certification
Talk to Our Experts
Product Data Sheet Show all documents

Usage

  • Bathroom floors and walls
  • Basements
  • Retaining walls
  • Balconies
  • Swimming pools
  • Water retaining structures
 

Advantages

  • Suitable for horizontal and vertical application
  • Easy to mix and apply
  • Waterproofing static cracks and capillaries
  • Compatible with cement based substrates and render
  • Slightly flexible
  • Good adhesion
  • Non toxic
  • Impermeable
  • Low VOC
  • Can contribute to LEED certification

Packaging

14.6 kg pack (10 kg powder & 4.6 kg liquid)

21.9 kg pack (15 kg powder & 6.9 kg liquid)
29.2 kg pack (20 kg powder & 9.2 kg liquid)

Product Details

Product Information

Shelf Life

9 months from the date of production

Storage Conditions

Stored properly in undamaged and unopened original sealed packaging in the dry conditions at temperature range 5 oC to 35 oC. Protect from direct sunlight, moisture and frost.
Technical Information

Tensile Strength

> 1 MPa

(ASTM D412)

Tensile Adhesion Strength

> 0.5 MPa

(HKHA MTS Specification, Part D Clause 2.1.14)

Water Penetration Under Pressure

0 mm at 0.5 MPa water pressure

(DIN 1048)

Application

Application Information

Ambient Air Temperature

> 5 oC
Consumption

Consumption

1 kg/m2/coat; apply two coats
Application steps

MIXING

Pour all of the liquid component into a clean dry mixing container and mix using a slow speed drill fitted with a paddle. Slowly add the powder component into the liquid and continue to mix. When all of the powder has been added, increase the mixing speed and continue to mix to produce a lump free slurry.

APPLICATION

Spray, roller or brush apply Monoprufe® WS in two coats. The second coat should be applied at right angles to the first and after the first coat has cured for 2–4 hours.

 

CLEANING OF TOOLS

Clean all tools and application equipment with clean water immediately after use.

Documents