Recommended Dosage
Use as Bonding Coat
Mix 1 part of SikaLatex® to 1 part of fresh Portland cement to produce a stiff bonding slurry.
Coverage: approx. 4–6 m2/kg of SikaLatex® (actual consumption depend on surface profile).
Use as Spatterdash
| Mixing Ratio (by volume) |
| Cement : Sand | 1 : 2 |
| Gauging liquid Water : SikaLatex® | ~2.5-4.0 : 1 |
* moisture of sand will greatly affect amount of water added.
* adjust the quantity of gauging liquid add into the cement sand mixture untill desire condition for spatter dash.
Use as Mortar Additive
| Typical Mix Designs | Mix 1 | Mix 2 |
| Application | Render/Screed, Repair mortar | High performance render and repair mortar |
| Portland Cement (kg) | 50 | 50 |
| Sand (kg) | 125* | 125* |
| Aggregate (kg) | - | - |
| SikaLatex® (kg) | 7 | 9 |
| Water (litre) | Up to 12 | Up to 9 |
| Typical Yield | 0.09 m3 | 0.09 m3 |
| Coverage | ~ 1.29 m2/kg/10 mm | ~ 1 m2/kg/10 mm |
Use as Special Application
| Typical Mix Design | Mix 3 |
| Application | Heavy duty floor screed |
| Portland Cement (kg) | 50 |
| Sand (kg) | 75** |
| Aggregate (kg) | 75 (gravel of 3–6mm) |
| SikaLatex® (kg) | 6 |
| Water (litre) | 12-20 (according to the mixing status) |
| Typical Yield | 0.1 m3 |
| Coverage | ~ 1.67 m2/kg/10 mm |
Note : Ensure water contents of mixes are kept as low as possible.
*Mix 1 and Mix 2 : If thickness > 12 mm, an additional 25 kg sand should be added.
**Mix 3 : Semi-dry screeds > 25 mm, require only 4 kg SikaLatex®.
