Ronagrout GP

Shrinkage Compensated High Flow General Purpose Cement Grout

Ronagrout GP is a prepacked single component cementitious general purpose grout. Requiring only the measured addition of clean water to achieve workability from mortar consistency to free flowing grout. Ronagrout GP is suitable for various grouting, anchoring and concrete repair applications. The performance of the product is certified under the Hong Kong Concrete Institutes (HKCI) Product Conformity Certification Scheme for Repair Mortars (PCCS-RM) Class S and is suitable for repairs to concrete with a characteristic strength(fcu) up to at least 40 MPa. It can be applied in thick or thin section and is suitable for structural and non-structural repairs such as honeycombing ; Ronagrout GP contains an expansive agent to compensate for shrinkage and settlement in the plastic state and is specially modified to resist bleeding and segregation even when exposed to vibration. The rapid development of strength and high ultimate strength facilitates the early continuation of work and the installation of plant and equipment.

  • Controlled expansion to compensate for shrinkage and settlement in plastic state
  • Can be used as a patching mortar or flowable grout
  • Application 10 mm up to 100 mm thick per layer (Maximum 25 mm overhead)
  • Easy to mix and apply
  • Rapid strength gain
  • Can achieve very high compressive, flexural and tensile strengths
  • Monolithic bond to substrate
  • Low VOC
  • Can contribute to LEED certification