Ronabond® Primer

9 months from the date of production

Stored properly in undamaged and unopened original sealed packaging in the dry conditions at temperature range +5 ^oC to +35 ^oC. Protect from direct sunlight and frost.

> 5 ^oC

Approx. 30 minutes depends on temperature and site conditions

Approx. 20 m²/pack depends on porosity of substrate

Pour the Ronabond® Primer liquid into a suitable mixing vessel and slowly add the powder mixing with slow speed drill until homogeneous mixture is achieved. Once mixed prime any steel reinforcement and allow the primer to become tacky. Then brush apply a second coat of primer to the reinforcement and a first coat to the concrete surfaces. Whilst the primer is wet/tacky it should be over coated with the Ronabond® Concrete Repair Mortar, Ronabond® Floor Screed and Ronabond® Render. If the primer should dry it must be cross hatch scratched and reapplied.

Clean all tools and application equipment with clean water immediately after use.