Sikafloor® MultiFlex PB-55 UV
Sikafloor® MultiFlex PB-55 UV is a polyurethane, coloured, UV resistant, dynamic crack-bridging, slip-resistant car park decking system and is part of the Sikafloor® Multiflex flooring range. It provides a hard wearing, seamless, chemical resistant, low maintenance, slip resistant finish when broadcast with different aggregate grades and sealed with a matt finish seal coat. Varying thickness’s can be achieved from 4,0 –6,0 mm. Internal and external use.
- Waterproof
- Resistant to UV exposure
- Dynamic crack bridging properties
- High mechanical resistance
- Good chemical resistance
- Good abrasion resistance
- Textured gloss finish
- Low dirt pick up
- Easy cleanability
- Seamless
- Slip and skid resistant surface
- Scratch resistant surface
- Easy application
- Low maintenance
Usage
For car park decks:- UV exposed
- Turning areas
Advantages
- Waterproof
- Resistant to UV exposure
- Dynamic crack bridging properties
- High mechanical resistance
- Good chemical resistance
- Good abrasion resistance
- Textured gloss finish
- Low dirt pick up
- Easy cleanability
- Seamless
- Slip and skid resistant surface
- Scratch resistant surface
- Easy application
- Low maintenance
Colour
Available in many colours
Appearance
Textured, slip resistant, matt finish
System Details
ENVIRONMENTAL INFORMATION
- Conformity with LEED v2009 IEQc 4.2: Low-Emitting Materials - Paints and Coatings
APPROVALS / STANDARDS
- CE Marking and Declaration of Performance to EN 1504-2 - Surface protection product for concrete - Coating - Sikafloor®-156, Sikafloor®-160, Sikafloor®-161, Sikafloor®-376, Sikafloor®-359 N
- CE Marking and Declaration of Performance to EN 13813 - Resin screed material for internal use in buildings - Sikafloor®-156, Sikafloor®-160, Sikafloor®-161, Sikafloor®-376, Sikafloor®-359 N
- Coating system DAfStb Test Class OS 11 EN 1504-2, Sikafloor®MultiFlex PB-55 UV, kiwa, Test report No. P 11284-1b
- Reaction to Fire Classification DIN EN 13501-1, Sikafloor®MultiFlex PB-55 UV, Hoch, Classification report No. KB-Hoch-180049-2
System Structure
| Layer | Product |
| 1. Primer | Sikafloor®-156/-160/-161 + Aggregate broadcast 0,4–0,8 mm |
| 2. Membrane | Sikafloor®-376 |
| 3. Wearing layer | Sikafloor®-377 (filled 1:0.4 with quartz sand 0,1–3 mm) + Aggregate broadcast 0,4–0,8 mm |
| 4. Seal / top coat | Sikafloor®-359 N |
Composition
Polyurethane
Nominal thickness
~4–6 mm
Shore A Hardness
| ~60 (14 days/+23 °C) | (DIN 53505) |
Abrasion Resistance
| < 3000 mg (CS 10/1000/1000) | (DIN 53109) |
Resistance to Wearing
| AR 0,5 | (DIN EN 13813) |
Resistance to Impact
| Class I | (SO 6272) |
Tensile Strength
| ~11 N/mm2 | (EN 53504) |
Tensile Adhesion Strength
| > 1,5 N/mm | (EN 1542) |
Crack Bridging Ability
| Class B3,2 (-20 °C) | (EN 1062-7) |
Reaction to Fire
| Cfl-s1 | (EN 13501-1) |
Chemical Resistance
Sikafloor® MultiFlex PB-55 UV always has to be sealed with Sikafloor®-359 N. Refer to the chemical resistance of Sikafloor®-359 N.
Permeability to Water Vapour
| Class III | (EN ISO 7783-1) |
Capillary Absorption
| w < 0,01 kg/(m2·h0,5) | (EN 1062-3) |
Skid / Slip Resistance
| R12/V4 | (DIN 51130) |
Application
Product Temperature
+10 °C min. / +30 °C max.
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
80 % max.
Dew Point
The substrate and uncured floor products must be at least +3 °C above dew point to reduce the risk of condensation or surface damage of the floor finish.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
≤4 % parts by weight
Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | ~24 hours | ~3 days | ~7 days |
| +20 °C | ~12 hours | ~2 days | ~5 days |
| +30 °C | ~5 hours | ~1 days | ~4 days |
Times are approximate and will be affected by changing ambient and substrate conditions
Consumption
| Layer | Product | Consumption |
| 1. Primer | Sikafloor®-156/-160/-161 + Aggregate broadcast 0,4–0,8 mm | ~0,4 kg/m2/layer ~1,0 kg/m2 |
| 2. Membrane | Sikafloor®-376 | ~1,9 kg/m2 (1) |
| 3. Wearing layer | Sikafloor®-377 (filled 1:0,5 with quartz sand 0,1–0,3 mm) + Aggregate broadcast 0,4–0,8 mm | ~1,7 kg/m2 (resin) + ~0,85 kg/m2 (quartz sand) (2) ~6,0–8,0 kg/m2 |
| 4. Seal / top coat | Sikafloor®-359 N | ~0,7–0,9 kg/m2/layer |
(1) Depends on roughness depth Rz (all values at +23 °C)
- Rz = 0,0: ~1,9 kg/m2
- Rz = 0,5: ~2,5 kg/m2
- Rz = 1,0: ~3 kg/m2
(2) Depends on temperature
- +23 °C: Filling 1:0,5 with quartz sand 0,1–0,3 mm
- < +15 °C: Filling 1:0,4 with quartz sand 0,1–0,3 mm
These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.
CLEANING
Refer to Sika® Method Statement: Sikafloor®-Cleaning Regime